Power Generation

Technical Solutions 24 Seven has assisted in building, constructing and maintaining generation halls, power stations and substations for Alstom, RWE International, British Energy and EDF. This work has enabled Technical Solutions 24 Seven to develop a business format that differs from previous industry standard models. This has included working closely with Alstom on generator testing, balancing and overspeed testing of large turbine rotors.

Jointing and Cabling
With expertise in EHV, HV and MV jointing, our jointing teams can work on joints from multiple manufacturers, including Pfisterer, Nexans and Prysmian. This includes testing and verification.

Substation Interfacing
With our experience in RTU and SCADA systems, Technical Solutions 24 Seven can design, develop, install and test a variety of Networked Control Systems (NCS), from small off-grid to full network interfaces through either dedicated SCADA/DCS to simple PLC and SCADA systems.

Designing, Installing, Commissioning
For many years Technical Solutions 24 Seven has also had electro-mechanical and civil design capability using 3D CAD packages such as SolidWorks, enabling us to design and produce both FEA and FEED studies, allowing the design and documentation to be created before manufacture.
Working at Rugeley Power Station Technical Solutions 24 Seven designed, installed and commissioned RWE International Generator blackout baring system. This was designed to take over from the steam turbines once steam had stopped being produced. This allowed the generator rotor to slow down under a controlled environment, which let the rotor to cool and continue to rotate at a fixed 2 rpm until the system was cool enough to stop without diffracting.

System Obsolescence Management and Spares
TS247 is an industry leader in repairing and supporting Obsolete Control Systems. With our vast experience of working with these Obsolete Control and Automation Systems, we can put in place a complete support package of repair, purchase third-party/refurbished components/parts and with our in-house design facility, we can re-manufacture or migrate to more modern equivalents within the same manufacture.

Maintenance and Support

Partial Discharge;

EHV, HV secondary current injection;

Gas charging and monitoring;

SCADA interface and upgrade;

RTU installation, upgrade and commissioning;

RMU installation, upgrade and commissioning;

HV and MV testing.